3M Window Films are warranted to maintain their solar properties without bubbling, peeling, cracking, or crazing. Many of our films are warranted against discoloration, too. (Those which do not use dyed polyesters). Should the product proved to be defective, 3M and the authorized 3M Dealer will replace the film and provide the reapplication labor free of charge.
Seller also warrants against glass failure due to thermal shock fracture or seal failure (maximum value of $500 per window) caused only as a direct result of the application of 3M Window Films provided the film is applied to recommended types of glass and the glass failure is reported to the seller within the specified time (listed below) from the start of the installation.
- Sixty (60) months coverage against thermal shock fracture
- Forty (40) months coverage against seal failure if covered by original window manufacturer
Any glass failure covered by this warranty must be reviewed by Seller prior to repair, and only covers film and glass replacement.Optional Platinum Warranty – Residential Applications Only
The 3M Platinum Warranty matches the terms and conditions of the residential customer’s existing window manufacturer’s warranty. The 3M Platinum Select Warranty matches the terms of the Platinum Warranty, but also increases the replacement value of $500 per window to $1500 per window. This allows the customer continuous coverage on new windows and the peace of mind having assurance that a product from 3M is protecting their investment.
Contact us for details!
3M films are professionally applied by skilled, authorized 3M Dealers, like us! Almost all 3M films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges.
We suggest allowing thirty days for the film to fully dry and cure. During this curing process, it is normal to have small water bubbles and/or a hazy appearance. These will disappear as the film dries; depending upon the film type and weather conditions, drying may take as much as 30 (or even 45) days, or as little as a few days. Once dried, 3M Window Films will look great and perform for many years to come.
After thirty (30) days, you may clean 3MTM Films using normal household cleaning solutions, including ammonia based products: e.g., Windex, and a soft, lint-free cloth or towel. You may also use a squeegee to clean the films. Abrasive products which would scratch or damage the film should not be use
3M Window Films are made to last for many years. The exact length of time depends upon the type of film applied, window orientation, type of glass it is applied to and the particular climate in which it is applied. Most applications last well beyond the warranty length.
The application of 3M Window Films will increase the temperature of your sunlit glass which will increase the stress on the glass edges. The quality of those glass edges and several other factors (external shading, interior shading, glass history, type of film, size/shape of glass, indoor/outdoor temperature) all contribute to the potential risk of glass breakage.
3M’s forty plus years of experience with applying 3M Window Films to different types of glass enables us to make proper film/glass recommendations and minimize the potential for glass breakage. In addition, we support these recommendations with our 60-month glass breakage warranty against thermal shock fracture. Should the glass break within 60-months of application, 3M will replace the glass (maximum $500.00), and Custom Glass Tinting will replace the film.
No, 3M Window Films do not cause seal failure. We’ve been applying 3M Window Films to insulated windows for many years with several millions of square feet of film applied to date.
When recommended films are applied to the inside pane of an insulated glass unit, there will be some absorption (except with clear safety films) of the sun’s energy, which will increase the temperature of the glass pane. Some of this heat will transmit to the airspace, slightly raising the airspace temperature. However, even a 20 F degree increase (unusual for most films) will result in a less than 3% change in air pressure, whereas properly made units are designed and tested to withstand 22% changes in air pressure.
Risk of seal failure is greatly determined by the quality of workmanship and the quality of the materials that go into building the insulated glass units. The best guard against seal failure is to purchase well-made units from reputable window manufacturers that have solid experience and histories with insulated units.
The ultra violet (UV) protection that we use in our proprietary adhesive system is not indefinite, but we design our window films to maintain high UV protection throughout their lifetime. In fact, we tested an actual glass sample from The Dumbarton House, Washington,DC, and the ultra violet transmission still measures < 1% after 10 years!
3M Safety and Security Window Films are designed to make glass shatter-resistant by holding the glass pieces together when broken.
Compared to 3M Sun Control Window Films, 3M Safety & Security Window Films are made with thicker polyester and a much thicker, more aggressive adhesive. 3M Ultra Safety & Security Window Films are unique in the industry; they are built using a special micro-layered polyester technology which increases the films’ tear resistance significantly. The impact and tear resistance of Ultra films outperform all other films of similar thickness.
No, 3M Safety & Security Window Films are not hurricane-proof, earthquake-proof, bullet-proof, bomb-proof, nor burglar-proof. Again, they are designed to make the window glass more shatter-resistant.
In the event of a windstorm, these films may have significant safety and security value. They can reduce the risk of injury from flying shards of broken glass, and possibly help prevent debris and water penetration through the window depending on the severity of the storm (and the type of glass, framing system, size and velocity of objects, and more).
In an earthquake, these films can reduce the risk of serious injury from flying shards of broken glass, and possible prevent glass from falling out of a home or building. Again, much may depend upon the severity of the quake (and the type of glass, framing system, and more, too).
Bullets: these films are not designed to stop bullets.
3M Safety & Security Window Films were originally developed to address international concerns and needs for improved safety and security against terrorist acts of bombings. These films can significantly reduce the risk of serious injury from flying shards of glass due to blasts, however, much depends upon the severity of the blast and the proximity of the window glass to the blast (and glass type, framing system, and more too).
3M Safety & Security Window Films are a low profile, high performance measure of security in the battle against ‘smash and grab’ crime. The tough, shatter-resistant qualities of the film can hold the window glass together even if a brick (or similar object) were actually to pass through the glass. The thief must now make a choice; continue to attack this window, try another window, or move on. Time is short, and often they move on. However, if they are determined to gain entry, they will get in. It is generally recommended that the property have proper alarm systems in addition to 3M Safety & Security Window Film.
IMPORTANT NOTICE: This product is not approved in the State of Florida for use as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm. In compliance with Florida Statute 553.842, this product may not be advertised, sold, offered, provided, distributed, or marketed in the State of Florida as hurricane, windstorm, or impact protection from wind-borne debris from a hurricane or windstorm.